The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the simulations have been performed with different return periods for rainfall data.

ABSTRACTThe principal aim of the study was to compare the feeding behaviour of cattle, sheep and goats on pasture and explain any differences between speices. Furthermore, I compared foraging behaviour between dry season and the beginning of the rainy season, in order to see any relationships between weather and behaviour.The study was carried out in Shompole in southern Kenya. Behavioural data were collected by observing herds of cattle, sheep and goats on pasture. The livestock were herded on pasture during the days and kept in bomas, where people live, during the nights. The weather in Shompole is characterized by high ambient temperature and low, bimodal rainfall.

Natural disasters are becoming more common due to climate change and it is important to adapt the society and its infrastructure to withstand events such as extreme rainfall. Precipitation is an important climatic factor affecting the transport and annually generates the cost of millions in damages, over the past 40 years heavy rain has increased and will continue to increase in the future. The extreme rainfall that occurred in Kramfors municipality in September 2013 led to flooding and destroyed several roads, including highway 90, which recently both had been rebuilt and given a new stretch of road. Extreme rainfall had also occurred in the municipality earlier.  The aim of the thesis was to examine how the Swedish Transport Administration handles new knowledge gained after natural disasters and how this is used in the planning of new roads.

ABSTRACTThe principal aim of the study was to compare the feeding behaviour of cattle, sheep and goats on pasture and explain any differences between speices. Furthermore, I compared foraging behaviour between dry season and the beginning of the rainy season, in order to see any relationships between weather and behaviour.The study was carried out in Shompole in southern Kenya. Behavioural data were collected by observing herds of cattle, sheep and goats on pasture. The livestock were herded on pasture during the days and kept in bomas, where people live, during the nights. The weather in Shompole is characterized by high ambient temperature and low, bimodal rainfall.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

I denna rapport undersöks hur mängden organiskt kol, TOC (Totalt organiskt kol), varierar i tid och rum i Mälarens avrinningsområde, samt vad det är som styr TOC-halten i Mälaren. Det är viktigt att förstå dynamiken hos TOC i Mälaren och i dess avrinningsområde eftersom ökat TOC i vattnet påverkar vattenkvaliteten och orsakar problem vid beredning av dricksvatten. TOC kan bland annat reagera med klor/UV-ljus och bilda cancerframkallande ämnen. Det kan också öka antal mikrober i vattnets distributionssystem.Arbetet omfattar analys av samband mellan elementen, transportberäkningar per ytenhet av elementen till Mälaren och en modelleringsansats för ett av avrinningsområdena. Rapporten innehåller även en jämförelse mellan de olika vattenföringsmodellerna samt uppmätt vattenföring för analys av eventuella systematiska skillnader mellan dessa som påverkar beräkningen av TOC och de andra elementens transport till Mälaren.Analysen av sambanden mellan variablerna TOC (mg/l), kaliumpermanganat förbrukning (KMnO4, mg/l), absorbans_F (F=filtrerad), järn (mg/l), mangan (mg/l) och SO4_IC (sulfat mätt med hjälp av jonkromatografi, mg/l), visade att vissa av dessa variabler är korrelerade med varandra.

Stage-discharge equations for lakes without disharge measurementsSimon AnderssonIn 2015 all lakes, rivers, coastal water and groundwater should be of good ecological statusaccording to the water framework directive from the European Union. In the process ofimproving the quality of Swedish water bodies, knowledge of where problems occur isneeded in order to utilize the resources optimally. The ability of lakes to store water is animportant factor since it controls the flow of water through the country. A stage-dischargeequation is a mathematical relation between discharge from a lake and its water level. Bybetter understanding of stage-discharge equations for lakes, their storage capacity can bedescribed better in hydrological models.This master thesis aims to evaluate methods for determining stage-discharge equations forlakes where a variable amount of field measurements is available.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant. By also documenting how much time we spent involving users we will show to which degree user involvement is effective. We found out that a couple of fast techniques could get very much result in the form of usability enhancing suggestions to the developers.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

The purpose of this thesis is through a case study and a survey; to examine the most appropriate communication channels between a sender and a receiver. It also aims to make this relationship more effective.The following questions are to be answered:1. Which communication channels ought to be used to optimize the message from Skara Näringslivsoffensiv to its target group?2. Which communication channels is Skara Näringslivsoffensiv planning to use?3.

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

Creating a database to manage medical data is not the easiest. We create a database to be used for a presentation tool that presents medical data about patients that is stored in the database. We examine which of the three databases, MySQL with relational design, MySQL with EAV design and MongoDB that are best suited for storing medical data. The analysis i performed in two steps. The first step handles the database that is most effective to retriev data. The second step examines how easy it is to change the structure of the various databases. The results show that depending on whether efficiency or maintenance is most important, different databases are the best choise. MySQL with relational design proves to be most effective while MongoDB is the easiest to maintain..

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.